If you know me, I’m one for making my Tacoma look more unique than all the other builds out there. My truck is equipped with a Prinsu roof rack like many other trucks out on the road. If you’re looking to set your setup apart from all the others, then look no further than these shield plates.
It offers two benefits. They will add style to make it stand apart from all the other racks you see on the trail or in the parking lots at your local mall. You can choose to order them in Black, White, Grey, or Bare metal for a custom color option. I chose to go the bare metal route so I could have them matched to my Tacoma for that unique touch.
Style isn’t the only thing they will add, Prinsu had durability in mind when they created this add-on. Adding a set of plates will increase the thickness of your rack by more than double and helps to reinforce the overall structure.
Note: This only works with the original (V1) Prinsu racks – NOT the Prinsu Pro.
Find It Online
- Prinsu Rack Shield Plate: Check Price
Table Of Contents
Features & Specs
- Aluminum construction
- 3 powder coat options or bare metal
- Make your rack 54% thicker
- Customization
- Added strength
- Simple installation
- Limited lifetime warranty
Installation
You can use this article as your guide to help with the installation.
Required Tools
- Philips screwdriver
- 3/8″ ratchet
- 3/8″ socket extension (optional)
- T-30 Torx socket
- Towel or blanket
Step 1. Remove Wind Fairing
Using a Philips screwdriver you need to remove all 10 screws holding the front wind fairing onto your Prinsu. After you get your existing wind fairing off, it’s probably a good idea to clean everything up. The cleaning is optional but it’s always good to clean up the truck during installs.
As you can see from my photo, my wind fairing has the Prinsu wind-faring decal installed. If you have something like this you can either choose to remove it or leave it on. I ended up leaving my decal on since you can’t see it when the shield plate is installed.
Step 2. Install Fairing Plate
The shield plate and wind fairing are all pretty lightweight weight so holding them up isn’t too difficult. I started by inserting the top left screw and then doing the top right screw to hold both in place. After that, I installed the last remaining 8 screws.
Step 3. Disconnect Crossbars & Accessories
Every screw from the side supports will be removed to get the plates installed. This means you will need to do only one side at a time because you will be separating all the cross bars. It’s a good idea to place a towel or blanket down on the roof of your truck to prevent the cross bars from scratching it.
If you have any accessories like I have the red hooks and the summit handles, those will all be removed temporarily as well to add the shield plate.
Step 4. Installing Side Plates
After you get all accessories and hardware removed from one side, align your side shield plate. Just like the front wind fairing, install a screw in the front and rear, just to line things up before you install the remaining hardware. If you plan on adding your accessories back on, you can install those over the top.
Final Thoughts
I love how this turned out, they give the rack a completely different look. I’m stoked on the custom powder coat as well.
If you opt to get the black ones, it won’t change how everythings looks but you will still gain the added strength upgrade. Increasing the width of your roof rack by more than 50% will help withstand more load and also help it last longer.
The kit is lightweight but it makes your roof rack much stronger. whether you’re trying to change the looks, increase the durability and longevity, or you want to do both, then adding a shield plate kit is something you should consider doing.
Orange Boxx Fabrication starting using side cladding on their roof rack awhile ago. So the idea has been used for awhile now.
This article is about a product review, I never said it was a new invention.