All-Pro Off-Road Bed MOLLE Panel Review

All Pro Off-Road Bed MOLLE Panel On 3rd Gen Tacoma

Bed Mounting & Storage Solutions for 2nd & 3rd Gen Tacoma

In general, Modular Lightweight Load-carrying Equipment (MOLLE) panels are a great way to add mounting options and storage to the bed of your Tacoma. If you’re looking to keep all of your gear organized and easy to access, the All-Pro version is a great option that can be fully customized to fit your needs.

It features a unique modular design and high-quality finish that are designed to last. What’s more, installation is simple and the panel itself doesn’t eat up any of your valuable bed space.

Find It Online

  • All-Pro Off-Road Bed MOLLE Panel (2nd & 3rd Gen Tacoma): Check Price

Discount Code

  • Use code – TRAILCO – for 10% off!

Overview

Tacoma Truck Bed MOLLE Panel

This panel allows you to mount just about any MOLLE-compatible accessory you can find. It also features additional pre-drilled holes for mounting things like RotopaX and QuickFist clamps and offers additional tie-down points for securing your cargo.

The panel and mounting brackets are made from high-quality 11-gauge steel, making it super durable and resistant to bending with your accessories attached. I opted for the optional black powder coat, however, you can also get the it in raw steel if you want to choose your own finish.

For those who like simple installs, this one is 100% bolt-on and can used with or without the factory accessory rail.

Installation

How To Install All-Pro Off-Road Bed MOLLE Panel

Installing the panel was super easy and only took me 30 minutes. The kit includes all of the hardware and brackets needed.

Tools Required:

Step 1. Remove Front Bed Bolts

3rd Gen Tacoma Front Bed Bolts - MOLLE Panel Installation

Start by removing the two bolts at the front of the bed using a T55 Torx socket. Set these aside as you will be reusing them later.

Step 2. Attach Mounting Feet To Panel

All Pro Off-Road Bed MOLLE Panel Mounting Feet

Using the two 3/8 bolts, lock washer, and washer, secure both of the mounting feet onto the panel. Keep these hand tight for now for final adjustments later.

Step 3. Remove Header Rail Bolts

Installing MOLLE Panel In Tacoma Bed

Remove the two upper bed bolts on the far left and right sides using a T30 Torx bit. These are known to easily strip, so make sure to apply some pressure to the bolt when unscrewing them.

Step 4. Align MOLLE Panel

3rd Gen Tacoma Truck Bed MOLLE Panel

Place the panel at the front of the bed and align the holes on the mounting feet to the holes in the bottom of the bed.

Step 5. Loosely Install Header Rail Bolts

Installing the All Pro Off-Road Bed MOLLE Panel

Slide the included spacers between the bed and the panel. Then, using two of the new M6 mounting bolts, lock washers, and washers, reinstall the far left and right screws and spacers using your 5/32 Allen key to hold it in place.

Step 6. Set Mounting Feet Height

Installing Bed MOLLE Panel 3rd Gen Tacoma

With the upper bolts tightened, screw in the bottom bed bolts but do not tighten them all the way. Tighten both of the bolts on the mounting feet and panel with your 7/32 Allen key.

Make sure that the bottom of the mounting feet is sitting flush against the bed.

Step 7. Install Upper Bolts & Hardware

Installing A Bed MOLLE Panel

Remove the two screws that you installed on the far left and right side so that you can move the panel and unscrew the remaining upper factory bed bolts using a T30 Torx bit.

With all of the upper factory bolts removed, reinstall all of the new M6 bolts, washers, and spacers into the factory bed holes and tighten them down until snug.

Step 8. Tighten Down Bed Bolts & Remaining Hardware

MOLLE Bed Panel Installation On 3rd Gen Tacoma

Finally, tighten the bottom bed bolts and torque them to around 60 ft-lbs.

Final Thoughts

Bed MOLLE Panel Review 3rd Gen Tacoma

Having the ability to mount all different types of equipment and accessories is a total game changer for organizing the bed of my Tacoma. Before having the MOLLE panel, I would just toss my gear in the back where it would move around when hitting the trails which left me having to reorganize every time. Since I use my bed to sleep in, this isn’t something that was efficient or practical.

I’m super impressed with the quality and durability. Being made out of steel, it is able to hold any piece of gear I’ve mounted to it and gives me a way to secure my cargo.

With a super easy installation, high-quality materials, unlimited customization options, and a design that combines both aesthetics and functionality, I think the All-Pro Bed MOLLE Panel is the perfect exterior accessory for every Tacoma.

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
0
Questions or Comments?x
()
x