BillieBars Bed Bars Review

BillieBars: The Tonneau Truck Cover Compatible Bed Bars on 3rd Gen Tacoma

Minimalist Bed Rack That Works With Tonneau Covers

Camping, overlanding and bed racks are pretty synonymous in today’s world. Once you start to use your truck on the trail, you quickly realize that you’ll need more function, storage and utility out of your Tacoma.

Traction boards, shovels, axes and rooftop tents are just a few of the items that you might see on a variety of Tacoma builds. Those things are great, but you need somewhere to mount them. Before you start mounting a bunch of offroad gear, there might be another issue.

A lot of guys run tonneau or bed covers for bed security and to keep items out of the elements. Before now, there really weren’t too many options. Especially not a simple, minimalist design. Not everyone needs or wants a bed rack. For those who want the best of both, there’s a new product to look out for.

Enter the BillieBars Bed Bar System.

In this article, we’ll be doing a complete install guide for the bed bars and accessory MOLLE panel mounts, as well as our initial impressions.

Find It Online

Company Background

Bed Cover Compatible Bed Rack Solution for 2nd & 3rd Gen Tacoma

BillieBars were created out of necessity. The founder, Bill, was tired of buying expensive bed bars that were poor quality, difficult to install, and often couldn’t hold the gear he needed them to.

Being a life long truck enthusiast, and an expert engineer, Bill decided to make it his mission to create bed bars that could actually get the job done.


  • Made in America
  • Helicoil inserts so the threads on the bars don’t wear out (you can take them on and off as much as you’d like)
  • High strength steel brackets that are black wrinkle powder-coated (RTV in hard-to-reach places to prevent rust)
  • Black anodized aluminum bars with a T-slot configuration
  • Compatible with most tonneau covers
  • Low to truck bed so tents, bikes or cargo aren’t above the roof
  • Easy installation (achievable by one person)
  • Lightweight – Total system weighs 46-49 pounds (depending on the model)


Unboxing the BillieBars Bed Bar System - 3rd Gen Tacoma

The BillieBars came nicely packaged and all items came in great condition.

Mounting Feet/Risers

BillieBars Bed Bar System for Tacoma Trucks - Installation on 3rd Gen Tacoma


BillieBars for Toyota Tacoma - Hardware

Step 1. Remove Tonneau Cover

This step, of course, only applies to someone who has a bed cover installed on their truck.

Step 2. Choose Mounting Location

Mounting BillieBars on 3rd Gen Toyota Tacoma

Insert the in channel nuts and bolts into the t-slot on the side of the bed.

This is purely to help visualize where you’ll mount the system.

Step 3. Attach Bed Mounts

Step-By-Step Install for BillieBars Bed Bar System for 3rd Gen Tacoma

Take one of the feet and loosely secure it to the bed rack rail.

Do the same thing with the remaining bed mounts. Make sure they are properly lined up before moving to the next step.

Mounted Feet/Risers

Installing Bed Bar System on 3rd Gen Tacoma

Step 4. Install Main Crossbar

BillieBars Bed Bar System - Complete Install Guide

The two holes that are on top of the feet are to secure the bar and the 2 vertical holes on the bottom are for the BillieBars accessory Panel.

Full Install for BilliBars Minimalist Bed Bar System

Install the main crossbar and double-check that the feet line up correctly.

Important Note: If you have a tonneau cover, do not secure the bars onto the feet till you re-install your tonneau cover. Otherwise, you’ll have to take everything apart again.

Finished System

BillieBars Bed Bar System on 3rd Gen Toyota Tacoma

Molle Panel Accessory Mount

We also got a pair of these sweet MOLLE Panels. We felt that this is the option most users will go with in addition to the bars themselves.


  • Measures 52 inches long and 5.25 inches tall, the panel is mounted with brackets that attach to the BillieBars
  • Designed to carry recovery boards, high lift jacks, gear bags, roto-pax and more
  • Flexible design and angled profile for ease and accessibility
  • Made from powder-coated aluminum – Rust is not an issue!
  • 3-Year Bracket Guarantee

Find It Online

MOLLE Panel Install

BillieBars Molle Panel Install on Bed Bar System

Step 1. Mount Molle Panel Bracket

Mounting Billie Bars Accessory Molle Panel

The bracket will be placed on the BillieBar Mounts like so.

How to Install BillieBars Molle Panels

Line up the security bolts and use a hand tool or an impact to put the bolts in.

You will need a corresponding socket or wrench to hold the nut/washer on the backside to prevent it from spinning.

Step 2. Mount Molle Panel

Billie Bars Bed Bar System with Molle Panels

We preinstalled some Quick Fist Rubber Clamps on the molle panel before we mocked it up on the brackets.

Quick Fist Mounts on BillieBars Bed Bar Accessory Molle Panel

BillieBars gives you the option of how high or low you want the panel to be; we decided to do it in the middle and only used 4 security bolts total to bolt the panel in on both sides.

It’s totally up to you on how many mounting holes you want to use to add extra security or rigidity. Of course, for the strongest setup, use all of the provided screws.

How to Install BillieBars Tonneau/Bed Cover Compatible Bed Bar System

Secure the security bolt onto the brackets by using a hand tool/impact.

Mounted Molle Panel on BillieBars - 3rd Gen Tacoma

Do the same process on the other bracket and you are done! One heck of a system.

This is an extremely modular setup for the weekend adventurer. Above you can see the Molle Panel mounted onto the brackets of the BillieBar.


Shovel & Ax Mounted on BillieBars Accessory Molle Panel

The panel fits on either side of the truck for accessories. Pictured here are the shovel and ax combo.

You can basically put anything you want on the side access including RotopaX storage, recovery boards, water systems, etc.

Simple Aluminum Bed Bar System for 2nd & 3rd Gen Tacoma

One more angle.

If you like simple, functional designs, this product is for you.


Tepui Rooftop Tent Mounted on BillieBars Bed Bar System - 3rd Gen Tacoma

Unique Solution for Bed Storage

The main purpose of the system is to be able to have a modular bed rack/accessory rack for your Toyota Tacoma. The BillieBars system being compatible with almost all tonneau/bed covers is a huge plus of the system. This type of system works best for people that still want to be able to use their Tacoma as a regular truck with having full access to the bed when needed.

The whole system comes off in less than 5 minutes and can be reattached pretty quickly as well. So for the weekend warriors that may use their truck for cargo or work on the weekdays, this is a great solution. It is not heavy, nor does it require a lot of work or even another person to take off.

Some bed racks are meant to be mounted on a truck permanently but may not always be needed when someone is not camping or carrying cargo. So for the occasional adventurer or even someone that is trying to keep the weight down on the truck when it is not being used for camping trips, this is an amazing system!


Basically, this system is compatible with everything. BillieBars have a black anodized bar with a T-slot configuration. A carriage bolt or a hex head bolt is enough to mount anything to these bars.

The possibilities are endless with this system. BillieBars can even be modified to fit different types of brackets depending on what the user intends to use them for. This is a super universal and functional bed rack option.

Mounting Ideas

  • RTT mounts for hard shell or soft shell tent
  • Mountain bikes
  • Snowboards
  • Cargo baskets/trays
  • Recovery gear – HiLift, MaxTrax, etc.

Build Quality

The bars are extremely sturdy. We stood on the bars to check for rigidity and strength (I am 5’7 and 180lbs) and there was barely any deflection on the bars themselves. This was only on one bar, so something mounted to both of them is really secure.

Per BillieBars, the system has a max dynamic weight load of 500lbs and a max static weight load of 1000lbs.

Final Thoughts

Complete Review & Overview for BillieBars Bed Bars on 3rd Gen Tacoma

The install is effortless, and it took less than 10 minutes for the bar to go on. It probably took longer to put the tonneau cover back on the truck than it did to install the BillieBars. These bars are extremely utilitarian and adaptable.

For people that daily drive their trucks and don’t necessarily need all their gear on all the time, this is a great choice. You can still use it simultaneously with your cover to protect items in the bed as well. The price point is also very good; a lot of people can afford this as the first modular bed rack for their Tacoma.

We actually installed some of the parts of the rack on the trail. That’s how easy it is to remove and add anything to this system. The bars feel very stable when the truck is on the highway and wheeling; there doesn’t seem to be any type of deflection or rattling.

Overall, it’s a great system, and we think it’s worth a look!

Notify of

Oldest Most Voted
Inline Feedbacks
View all comments
Jim Fullerton
Jim Fullerton
2 years ago

Why don’t they offer these for the Number one selling truck on the planet. Ford F- Series! Obviously there is a larger base for sales with these models out numbering the models they do offer fitment for.

3 years ago

Will the Billie Bars work with a Pace Edwards Switchblade retractable tonneau? It seems like the thickness of the base where it’s secured to the Tacoma bed rails might make the retractable cover cinch up at the pinch points.

3 years ago
Reply to  Dusty

Your best bet would be to reach out to BillieBars directly, as we do not know exactly which tonneau covers will work. They should be able to help you out!

Sen Saephan
Sen Saephan
3 years ago

I have a tonneau cover from BAK Flip. Do you think it will work with the Billie bars?

3 years ago
Reply to  Sen Saephan

Message me on Instagram and we can make sure!


Questions or Comments?x